Removing/Installing The Floor Basket; Removing/Installing The Seat Positioning Strap - Invacare Lynx Series Owner's Operator And Maintenance Manual

All manuals and user guides at all-guides.com
REMOVING/INSTALLING THE FLOOR BASKET (FIGURE 2)

REMOVING/INSTALLING THE SEAT POSITIONING STRAP

(FIGURE 3)
INSTALLING
1. Remove the width adjustment knob that is located either underneath or on the back
of the seat frame.
2. Slide width adjustment knob through grommet on seat positioning strap.
3. Reinstall width adjustment knob into seat frame.
4. Repeat STEPS 1-3 for opposite seat positioning strap.
Width Adjustment
Thumb
Front
Screws
Shroud
Floor
Basket
Front
Shroud
Knob
Grommet
55
Floor
Basket
Rear
Shroud
Seat Frame
Seat Positioning
Strap
Vertical
Side