Copying The Front And Back Sides Of A Card On The Same Side Of A Single Sheet ([Id Copy]) - Konica Minolta Bizhub C3850 User Manual

You can select the page layout when copying a 4-page image onto the same side of one sheet.
The following describes the operation flow in the case where multiple 1-sided originals are copied, two pages
are reduced into the same side of one page, and printed on both sides of paper.
1
Load the original.
2
Tap [Duplex/Combine].
3
In [Duplex], tap [1-Sided > 2-Sided].
% For 2-sided original, select [2-Sided > 1-Sided] or [2-Sided > 2-Sided]. Select an arbitrary key ac-
cording to the original condition and copy result.
4
In [Binding Position], specify [Original] and [Output].
% For 1-sided originals, select the copy binding position in [Output]. If [Auto] is selected, the binding
position is automatically determined to fit the length of the long side of an original.
% For 2-sided originals, select the original and copy binding positions in [Original] and [Output]. If [Au-
to] is selected, the binding position is automatically determined to fit the length of the long side of
an original.
5
Tap [Combine].
6
Tap [2 in 1].
% To copy four pages on the same side of a single sheet, select [4 in 1 Horizontal] or [4 in 1 Vertical],
taking into account the layout.
7
Tap [Original Direction], then select the original loading direction.
8
Tap [OK].
9
Press the Start key.
The original is scanned, and copying starts.
Copying the front and back sides of a card on the same side of a single sheet
([ID Copy])
When you want to copy cards, such as an insurance card, a driver license card and a business card, you can
arrange the front and back sides of the card on a single page and copy the images on to the same side of
one sheet. This can reduce the number of sheets used.
0 The zoom ratio is fixed to 100%.
[Copy Functions]
A
B
3-3
3