Table of Contents
Advertisement
O.
FINAL ASSEMBLY OF GATE OPERATOR
Figure 12. Gate Operator Final Assembly.
1. Install gate operator top cover and secure with two wing nuts.
2. Swing hinged control box into cabinet and secure in place with hardware provided.
3. Install clear cover on control box and secure with the four screws provided.
4. Make sure that gate operator unit power switch is turned on.
5. Install gate operator cabinet access door and lock.
6. Cycle the gate to ensure it is operating properly.
Rev C
Doc 6001287 (01-20284)
18 of 40
Advertisement
Table of Contents
