Panasonic AW-HE40HWP Operating Instructions Manual page 93

Integrated
Hide thumbs Also See for AW-HE40HWP:
Table of Contents

Advertisement

Displaying the web screen using a mobile terminal
● Tally lamp lighting status displays
The lighting status of the camera's tally lamp is monitored
at regular intervals while the camera is connected, and the
lamp's display is updated.
While the tally lamp is on, the IP video display area frame
turns red.
When the tally lamp goes off, the display area returns to
normal.
Notes
● It may take 2 seconds or so for a change in the
lighting status of the tally lamp to be reflected on the
display of the mobile terminal.
● When "Disable" is selected for "Tally" (page 47,
page 76) the camera's tally lamp will not light
even when the tally signal is input. However, the IP
video display area frame turns red.
● If the HTTP port number has been changed from "80",
input "http://IP address/mobile/ " to specify the unit's port
number.
● If the authorization dialog box has appeared, input the
administrator or user name and the password.
Depending on the mobile terminal, it may be necessary to
input the password each time the screen changes.
● If the "User auth." (page 78) setting has been changed to
"On" from a personal computer while the mobile terminal
screen is displayed, it may not be possible to refresh the
mobile terminal screen.
In a case like this, first close the web browser which is
running on the mobile terminal, and then open the mobile
terminal screen again.
● If the images are large, it may not be possible to display
them on some mobile terminals.
● If, when using an Android terminal, more than one button
is pressed at the same time, one of the buttons may
remain pressed even after it has been released. At a time
like this, press again only that button that has remained
pressed to release it.
Example)
When the pan (left) button and pan (right) button are
pressed at the same time, either the pan (left) button
or pan (right) button will remain pressed, and panning
will continue.
 When the pan (left) button or pan (right) button that
has remained pressed is pressed again, the panning
will stop.
(continued)
93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents