Others 1/3 Screen - Panasonic AW-HE40HWP Operating Instructions Manual

Camera menu items
■

Others 1/3 screen

### Others 1/3 ###
Install Position
Preset Speed Table
Preset Speed
Preset Scope
Freeze During Preset
Speed With Zoom POS.
Focus Mode
Focus ADJ With PTZ.
Return
Install Position [Desktop, Hanging]
"Desktop" or "Hanging" is selected here as the method
used to install the unit.
Desktop: Stand-alone installation
Hanging: Suspended installation
● When "Hanging" has been selected, the top, bottom,
left and right of the images will be reversed, and
up/down/left/right control for panning and tilting will also
be reversed.
Preset Speed Table [Slow, Fast]
Set the preset speed table (Slow, Fast).
During preset playback, preset actions are performed at
Preset Speed (1 to 30) values that are based on the table
set here.
Slow: Set the preset speed table to "Slow".
Fast: Set the preset speed table to "Fast".
Preset Speed [1 to 30]
There are 30 preset pan-tilt operation speeds when
regenerating the camera direction and other information
which are registered in the preset memory.
Note
● If a high value is selected for the Preset Speed
setting, the image on the screen may shake when
operation stops.
Preset Scope [Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when
the contents of the preset memory are regenerated.
Mode A: Pan, Tilt, Zoom (including digital zoom), Focus,
Iris, Gain, White-BAL
Mode B: Pan, Tilt, Zoom (including digital zoom), Focus,
Iris
Mode C: Pan, Tilt, Zoom (including digital zoom), Focus
46
(continued)
Desktop
Fast
10
Mode A
Off
On
Auto
----
Freeze During Preset [Off, On]
Turn the function for freezing images during preset
playback off/on.
When this is set to "On", preset playback is performed
with a still of the image immediately preceding the start
of preset playback being output. The image freeze is
released when preset playback is finished.
Notes
● When this is set to "On", the start of preset
operations may be delayed momentarily due to the
image being frozen.
● When HDR is set to "Low" or "High", this is set to
"Off".
Speed With Zoom POS. [Off, On]
"Off" or "On" is set here for the function used to adjust the
camera direction's adjustment speed in conjunction with
the zoom magnification.
When "On" is set, the panning and tilting operations will
become slower in the zoom status.
This function has no effect during preset operations.
Focus Mode [Auto, Manual]
"Auto" or "Manual" is set here for the focusing function.
Auto:
The subjects are always brought into focus
automatically.
Manual: The focus is operated manually.
Focus ADJ With PTZ. [Off, On]
"Off" or "On" is set here for the function which
compensates for out-of-focusing when it occurs during
panning, tilting or zooming operations at the manual focus
setting.
This item can be selected only when "Manual" has been
selected as the "Focus Mode" setting.
Return
Use this to return to the previous menu.