Table of Contents
Advertisement
10
Setting up the display
Setting up the display
Mounting the display
You can install the display on a vertical surface with a suitable wall mounting bracket or
on a horizontal surface with the optional desktop stands. Please pay attention to the
following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this
display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause the
display to fall or malfunction.
Installing the display on a wall
VESA Standard:
ST750K: 600 x 200 mm (4 holes), 4 - M8 x 10L
ST860K: 600 x 400 mm (4 holes), 4 - M8 x 25L
1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.
Make sure that the size of the cloth is larger than the display.
2. Gently lay the display on the cloth with the LCD screen facing down.
3. Remove the desktop stands from the display if installed.
4. Identify the wall mounting screw holes on the back of the display as shown in the
illustration.
540.8
5. Install the wall mounting bracket on
the display and attach the display to
the wall according to the mounting
bracket's instructions. The length of
the screw should exceed the thickness
of the wall mounting bracket, please
refer to below chart for each model.
Make sure that all screws are
tightened and secured properly.
(Recommended torque: 16 (+2/-2)
kgf/cm). The mounting means should
be strong enough to bear the weight
of the display.
600.0
540.8
WALL MOUNT SCREW:4-M8*10L
ST750K
667
USB4
USB3 USB3.0
USB2
USB1
Coaxial-OUT
AC-IN
LCD
display
L2 mm
(L3")
600
667
ST860K
Thickness
the wall
L1
mounting
mm
bracket
Advertisement
Table of Contents
