Epson Stylus Pro XL Specification Sheet
Epson Stylus Pro XL Specification Sheet

Epson Stylus Pro XL Specification Sheet

Epson printer specification sheet
Hide thumbs Also See for Stylus Pro XL:

Advertisement

output
tray
interface
card cover
serial
interface
parallel interface
ink cartridge clamps
paper thickness lever

Printer Specifications

Printing
Printing method:
On-demand ink jet
Nozzle
64 monochrome (black) nozzles
configuration:
(16 4 staggered)
48 color nozzles
(16 3, cyan, magenta, yellow)
Ink Jet Printers
printer
cover
knob
control
panel
paper tray
Operate button
8/1/95
EPSON Stylus Pro and Pro XL
Printable columns and printing speed*:
Printable columns LQ printing speed
Character pitch
(characters per inch)
Pro
10
80
12
96
15
120
17 (10 condensed)
137
20 (12 condensed)
160
*
Print speeds vary depending on system configuration, software
application, resolution, and amount of page covered. Figures are
based on letter-size paper with color printing.
Resolution:
Maximum 720 720 dpi
Paper feed speed:
89 milliseconds per
2.2 inches per second
Input buffer:
64KB
Print direction:
Bidirectional with logic seeking
Control code:
ESC/P 2 and expanded raster graphics
code
Paper feeding:
Auto sheet feeder
Line spacing:
1 6
-inch (default), programmable to
1 8
-inch or in
control codes
Character tables:
1 Italic and 20 graphics character tables
Character sets:
14 International and 1 legal character
sets
Paper
Note:
Since the quality of any particular brand or type of paper may be
changed by the manufacturer at any time, EPSON cannot
guarantee the use of any particular brand or type of paper. Always
test samples of paper stock before purchasing large quantities or
printing large jobs.
Paper path:
Sheet feeder, front entry
Paper tray
100 sheets at 17 lb (64 g/m
capacity:
70 sheets of EPSON special coated paper
50 sheets of EPSON transparency films
30 sheets of EPSON high-quality glossy
paper
10 envelopes
Paper size:
Letter (8.5 11 inches)
A4 (210 297 mm)
Legal (8.5 14 inches)
US B (11 17 inches)*
Super A3/B (13 9 inches)*
A3 (297 420 mm)*
Statement (8.5 5.5 inches)
Executive (7.5 10 inches)
* Stylus Pro XL only
EPSON Stylus Pro and Pro XL-1
(characters per
Pro XL
second)
127
200
152
240
190
300
218
340
254
400
1 6
-inch line;
1 360
-inch increments using
2
) paper

Advertisement

Table of Contents
loading

Summary of Contents for Epson Stylus Pro XL

  • Page 1: Printer Specifications

    Note: Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot guarantee the use of any particular brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
  • Page 2 Humidity 20 to 60% RH Use envelopes that do not curl. The following EPSON genuine papers are available: S041062 Special coated paper for 720 dpi printing (Letter) S041067 Special coated paper for 720 dpi printing (Legal) S041068 Special coated paper for 720 dpi printing (A3)
  • Page 3: Interface Specifications

    ** The ink thaws in approximately 2 hours at 77°F (25°C). Caution: Use only genuine EPSON ink cartridges and do not refill them. Other products may cause damage to your printer that is not covered by EPSON’s warranties.
  • Page 4 EPSON Stylus Pro and Pro XL Pin assignments Signal Return Signal Direction STROBE DATA 1 DATA 2 DATA 3 DATA 4 DATA 5 DATA 6 DATA 7 DATA 8 ACKNLG BUSY SLCT AUTO FEED CHASSIS 19-30 INIT ERROR EPSON Stylus Pro and Pro XL-4...
  • Page 5: Control Panel

    Optional Interfaces Please refer to the specifications in the user’s guide packed with the optional interface card. Initialization The printer can be initialized (returned to a fixed set of conditions) in these ways: Hardware The printer is turned on. initialization The printer receives an parallel interface: pin 31 goes LOW.
  • Page 6: Default Setting Mode

    EPSON Stylus Pro and Pro XL On when condensed mode is selected. In this Condensed mode, the printer prints selected fonts at 60% of their width so that more characters can fit on a page. On when printing is paused. This light flashes...
  • Page 7: Installing The Ink Cartridges

    Follow the instructions that describe how to change the default settings by pressing the buttons on the control panel. When you are finished, press Pause and turn off the printer to exit the Default setting mode. Installing the Ink Cartridges Follow the steps below to install the printer’s ink cartridges.
  • Page 8: Testing The Printer

    For the self test, use paper that is at least 8.25 inches (210 mm) wide if you have the Stylus Pro, or 11.7 inches (297 mm) wide if you have the Stylus Pro XL. Otherwise, ink sprays directly onto the platen and can smear subsequent pages.
  • Page 9: Calibrating The Printer

    Then press Enter. 5. When you see the Calibration Utility screen, make sure Stylus Pro or Pro XL is selected as the printer. If it isn’t, use to select it. Also make sure Print calibration pattern is selected at the bottom of the screen.
  • Page 10: Loading Oversized Paper

    EPSON Stylus Pro and Pro XL 1. Remove the output tray from the top of the paper tray. left edge guide 2. Slide the left edge guide inside the paper tray to the left as far as it will go.
  • Page 11 Ink Jet Printers EPSON Stylus Pro and Pro XL Load the paper or transparencies firmly against the right side of the paper tray. Slide the stack into the tray until you feel some resistance.
  • Page 12 1. Turn off the printer. 2. Open the printer cover. 3. Push in the knob on the right side of the printer and turn it counterclockwise as shown below. Be sure to turn the knob in the direction shown; otherwise ink from the printed sheet can come off on the printer and smear other sheets.
  • Page 13: Cleaning The Print Heads

    Use a higher quality paper, one that is not too thin, too thick, or rough. Make sure it is suitable for ink jet printers. For best quality, use EPSON special coated and high- quality glossy papers. Fan the stack of paper before you load it.
  • Page 14 None Product Support Bulletins None Technical Information Bulletins None Related Documentation TM-STYLUSPRO EPSON Stylus Pro Service Manual TM-STYLUS-XL EPSON Stylus Pro XL Service Manual PL-STYLUSPRO EPSON Stylus Pro Parts Price List PL-STYLUS-XL 4004918 4004920 4004919 8/1/95 EPSON Stylus Pro XL Parts Price List...

Table of Contents