Configure The Settings Relating To Ddns; Configure The Settings Relating To Snmp - Panasonic WV-SPW631L Operating Instructions Manual

•
The maximum number of concurrent access user varies depending on the maximum image size and
transmission format.

16.2.6 Configure the settings relating to DDNS

To access this camera via the Internet, it is necessary to configure the settings for the DDNS function.
Refer to page 185 for how to configure the settings relating to DDNS.
[Area]
Select the region where the camera is installed. If the camera is used outside of Japan, select "Global". If the
camera is used in Japan, select "Japan".
Japan/Global
[Service]
Select the DDNS service to determine whether or not to use DDNS.
•
Off: Does not use the DDNS function.
•
Viewnetcam.com: Uses the "Viewnetcam.com" service.
•
Dynamic DNS Update: Uses Dynamic DNS Update (RFC2136 compliant) without the DHCP cooperation.
•
Dynamic DNS Update(DHCP): Uses Dynamic DNS Update (RFC2136 compliant) with the DHCP
cooperation.
•
Default: Off
Note
•
When using Dynamic DNS Update (RFC2136 compliant), refer to the network administrator for whether
or not to cooperate with the DHCP.

16.2.7 Configure the settings relating to SNMP

The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera
by connecting to the SNMP manager. When using the SNMP function, contact the network administrator.
16 Configuring the network settings [Network]
Operating Instructions 169