Change The Aux Name [Alarm]; Configure The Settings Relating To The Camera Action On Alarm Occurrence [Alarm] - Panasonic WV-SPW631L Operating Instructions Manual

13 Configure the alarm settings [Alarm]

13.3 Change the AUX name [Alarm]

Click the [Alarm] tab on the "Alarm" page. (®page 41, page 43)
The names of "AUX", "Open" and "Close" on the "Live" page can be changed.
AUX title
[AUX (Up to 10 characters)]
Enter the name for "AUX" on the "Live" page.
•
Unavailable characters: " &
•
Default: AUX
[Open (Up to 5 characters)]
Enter the name for "Open" of "AUX" on the "Live" page.
•
Unavailable characters: " &
•
Default: Open
[Close (Up to 5 characters)]
Enter the name for "Close" of "AUX" on the "Live" page.
•
Unavailable characters: " &
•
Default: Close
Note
•
AUX is a camera terminal that allows users to operate (Open/Close) arbitrarily from the "Live" page.
For example, an operator can remotely control lights in a place where the camera is installed by
connecting the terminal to the light controller.
13.4 Configure the settings relating to the camera
action on alarm occurrence [Alarm]
Click the [Alarm] tab on the "Alarm" page. (®page 41, page 43)
The settings related to the camera action on alarm can be configured in this section.
128 Operating Instructions