Panasonic WV-SPW631L Operating Instructions Manual page 107

2.
Click the [Start] button of "Mask area".
→
Borders will appear and the image displayed on the [Image quality] tab will be divided into 48 (6x8).
3.
Click the divided areas to be masked.
→
The clicked areas will be masked and will become white. To cancel masking, click the area again.
4.
Click the [End] button after completing masking areas.
→
The borders on the image displayed on the [Image quality] tab will disappear.
IMPORTANT
•
The mask area may move out of alignment when the JPEG/H.264 "Image capture mode" setting is
changed. Make sure to check the mask area after changing the "Image capture mode" setting.
11 Configure the settings relating to images and audio [Image/Audio]
Operating Instructions 107