10 Configure the basic settings of the camera [Basic]
1.
Click the [Execute] button of "Self-signed Certificate - Generate".
→
The "Self-signed Certificate - Generate" dialog box will be displayed.
2.
Enter the information of the certificate to be generated.
Item
[Common Name]
[Country]
[State]
[Locality]
[Organization]
[Organizational
Unit]
[CRT key]
Note
•
The available characters for [Common Name], [State], [Locality], [Organization], [Organizational
Unit] are 0-9, A-Z, a-z and the following marks.
- . _ , + / ( )
•
When entering the IPv6 address for "Common Name", put the address in brackets [ ].
Example: [2001:db8::10]
3.
Click the [OK] button after entering the items.
→
The self-signed certificate will be generated.
Note
•
The information of the generated self-signed certificate will be displayed on "Self-signed
Certificate" - "Information".
Depending on the status of the self-signed certificate, the following are displayed.
66
Operating Instructions
Description
Enter the camera address or host name.
Enter the country name. (Omission is OK.)
Enter the state name. (Omission is OK.)
Enter the locality name. (Omission is OK.)
Enter the organization name. (Omission is OK.)
Enter the unit name of the organization.
(Omission is OK.)
Displays the key size and generation time & date
of the current key.
Available number of characters
64 characters
2 characters (Country code)
128 characters
128 characters
64 characters
64 characters