Operating Instructions Color CCTV Camera WV-CP600/G Series Model No. WV-CF614E Series WV-CP600/G WV-CF614E (Lens is optional for WV-CP600/G Series.) This manual covers the models: WV-CP600/G Series (WV-CP620/G, WV-CP624E, WV-CP600/G, WV-CP604E) and WV-CF614E Series (WV-CF634E, WV-CF614E). Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Preface About the user manuals The operating instructions of the camera consist of 2 sets: these operating instructions (PDF) and Installation Guide. This document explains how to configue the settings of the camera. Refer to the installation guide for further information about how to install the camera. ®...
About the setup menus Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting area. List of setup menu Setup item Description CAMERA ID...
Basic operation The operations in the setup menu are performed with the operation buttons after calling up the setup menu on the connected video monitor. The description below explains how to operate the setup menu basically. Screenshots of WV-CP620/G are shown as an example. Screenshot 1 Hold down the [SET] button for about 2 seconds to call up the Step 1...
Screen transition diagram CP620 Top screen “CAMERA ID” screen MODEL WV-CP620 SERIES **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ SPECIAL ().,'":;&#!?= LANGUAGE +-*/%$ SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC SHUTTER ON(HIGH)
Screen transition diagram CP600 Top screen “CAMERA ID” screen MODEL WV-CP600 SERIES **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ SPECIAL ().,'":;&#!?= LANGUAGE +-*/%$ SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC SHUTTER ON(HIGH)
Screen transition diagram CF634 Top screen “CAMERA ID” screen MODEL WV-CF634 **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ BACK-FOCUS ().,'":;&#!?= SPECIAL +-*/%$ LANGUAGE SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC SHUTTER ON(HIGH)
Screen transition diagram CF614 Top screen “CAMERA ID” screen MODEL WV-CF614 **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ BACK-FOCUS ().,'":;&#!?= SPECIAL +-*/%$ LANGUAGE SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC SHUTTER ON(HIGH)
Camera title setting [CAMERA ID] This item specified the camera title. The camera title that indicates the camera location and other information about the camera is created with alphanumerics and symbols, and is displayed on the screen. The camera title is named with up to 16 characters. Follow the procedure below to specify the camera title.
Camera operation setting [CAMERA SETUP] The following describes the camera operation settings. The following settings can be configured on the “CAMERA SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. CP600 The settings configured on the “CAMERA SETUP”...
About Super Dynamic 6 Functions Subject in the dark Subject in the bright area is hard to notice. area is hard to notice. If there is high contrast between the bright and dark areas in a shooting zone, the dark area becomes less visible because the camera adjusts the iris in accordance with the bright area.
Step 4 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to move the flashing cursor to the area to be masked and press the [SET] button. When the selected area is masked, the masked area will start blinking (between stripes and white). When the flashing cursor is moved to other areas, the masked area will be displayed in white.
Note: • When “ALC/ELC” is set to “ELC” or “ALC+”, only the AUTO mode is enabled. • When “SHUTTER” is set to options other than “OFF”, the electronic sensitivity enhancement setting cannot be performed and “---” appears. • When the magnification of “SENS UP” is increased, the screen becomes coarser, more whitish, or more flawed. However, this phenomenon is normal.
Manual fine adjustment of white balance The white balance is manually fine adjusted after white balance automatically adjustment in the automatic color temperature tracking mode (ATW1, ATW2) or automatic white balance control mode (AWC). Follow the procedures below. “CAMERA SETUP” screen Fine adjustment screen Area setting screen **CAMERA SETUP**...
“D&N (IR)” screen “CAMERA SETUP” screen **CAMERA SETUP** **D&N(IR) **(1) SCENE1 ALC/ELC AUTO1 SHUTTER LEVEL HIGH . I .. ON(HIGH) DURATION TIME SENS UP WHITE BAL ATW1 HIGH BURST(BW) D&N(IR) AUTO1 RET TOP END RET TOP END Step 1 Move the cursor to “D&N (IR)” and select the mode from the following. AUTO1 (default): Automatically switches between color and black-and-white images in accordance with the illuminance.
Step 5 CF634 CP620 Move the cursor to “BURST (BW)”, and decide whether or not to provide a burst signal output in the black-and-white mode. ON (default): Provides a burst signal output. OFF: Does not provide any burst signal output. Note: •...
Page 18
Step 2 Move the cursor to “MASK SET” and press the [SET] button. → The mask setting screen appears. “MOTION DET” screen Mask setting screen ** MOTION DET **(1) ..I .. 20 LEVEL DWELL TIME DISPLAY MODE ALARM MASK SET RET TOP END In the masked area, no alarm will be issued even if a moving object is detected.
Setting of scene change detection This function detects a change in the subject state that occurs by covering the camera with a cloth, a cap, or others, or by changing the camera direction largely. Follow the procedure below. “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC...
Camera system setting [SYSTEM SETUP] Performs the settings relating to the camera system such as synchronization, alarm input/output terminal and privacy zone. The following settings can be configured on the “SYSTEM SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. “SYSTEM SETUP”...
Step 3 Move the cursor to “POSITION” and press the [SET] button. Step 4 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the left upper position of the zone to be set and press the [SET] button. Step 5 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the lower right position of the zone to be set and press the [SET] button.
Step 1 Move the cursor to “EL-ZOOM” and select “ON” and press the [SET] button. → The “EL-ZOOM” screen appears. Step 2 Move the cursor to “→ PUSH SET” of “ZOOM” and press the [SET] button. → The zoom setting screen appears. Step 3 Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] or [DOWN] button, and press the [SET] button.
Back focus setting [BACK-FOCUS SETUP] CF634 CF614 Selects the back focus setting type and performs fine adjustment. The following setting can be configured on the "BACK-FOCUS SeTUP" screen displayed from the top screen. refer to page 22 and 23 for how to call up the screen. The lens adjustment shall be performed before the back focus adjustment.
Special menu setting [SPECIAL SETUP] The special menu setup is performed including the setting of the camera image quality and the communication configuration when a receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen.
"SPECIAL SETUP" screen “PIX OFF” screen Pixel compensation positioning screen **SPECIAL SETUP** ** PIX OFF ** ..I..160 CHROMA GAIN ..I..20 AP GAIN .I..15 PEDESTAL DISPLAY ALARM PIX OFF COMMUNICATION COAX CAMERA RESET PUSH SET 000 000 SER.NO. XXXXXXXX RET TOP END RET TOP END Step 1...
Camera language selection [LANGUAGE SETUP] A language for the setup menu is selected from the following: The language selection can be made on the “LANGUAGE SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. “LANGUAGE SETUP”...
Shortcut operation Use of a system controller with the “Camera function” button allows users to perform the shortcut settings with use of the numeric keypad and camera function button. The available shortcut operations with this unit are shown as follows. System controller operation Setting contents [9] + [0] + [Camera function]...