Brake Release Lever; Cylinder Clutch Lever; Ignition Cut-Out Switch - Ransomes 51 Marquis Safety, Operation & Maintenance Manual

6 CONTROLS
6.4

BRAKE RELEASE LEVER _____________________________________________

To apply the landroll brake, move the hand lever [F] to
the top position. To release the landroll brake, move the
hand lever [F] to the lowest position.
FOR THE SUPER CERTES ONLY:
This Machine must not Be Parked
On A Slope Without The Transport
Wheels Fitted.
6.5

CYLINDER CLUTCH LEVER ___________________________________________

To engage the cylinder clutch, move the lever [D] down.
To disengage the cylinder clutch, return the hand lever
to the start position.
6.6

IGNITION CUT-OUT SWITCH ___________________________________________

The ignition switch is found on the front of the engine.
Move the switch [A] to the '|' position to start the engine.
To stop the engine, move the switch to the '0' position.
en-32
WARNING
F
D
A