Ransomes 51 Marquis Safety, Operation & Maintenance Manual page 37

9. When you operate on a gradient, or near a drop off point, decrease the speed and be careful. Read the
Section 3.7.
10. To clean the cutting units, use a brush to remove grass from the cutting cylinder. The cutting cylinder
blades are sharp and can cause injuries. Never use the hands to clean the cutting cylinder, injury can
occur. Never try to clean the cutting cylinder blades while the machine is in operation.
11. Before you remove the grass box, disengage the cylinder clutch and apply the parking brake.
Disengage the drives, engage the
parking brake and stop the engine.
Before you clean, adjust or repair this
DO NOT USE ON GRADIENTS OF MORE THAN
CAUTION
equipment.
WARNING
18°
7 OPERATION
en-37