Vl-1000 Linear Amplifier Interconnections - Yaesu FT-2000 Operating Manual

I
NSTALLATION AND
VL-1000 L
Be sure that both the FT-2000 and VL-1000 are turned off, then follow the installation recommendations contained in the
illustration.
N :
OTE
Please refer to the VL-1000 Operating Manual for details regarding amplifier operation.
Please do not attempt to connect or disconnect coaxial cables when your hands are wet.
About the CONTROL Cable
The VL-1000 may be operated with the FT-2000
whether or not the CONTROL Cable is con-
nected; however, the CONTROL Cable allows
you to tune up the amplifier automatically by
just pressing the [F SET] or [TUNE] key on the
VL-1000, so as to transmit a carrier for tuning
purposes.
FT-2000 O
PERATING
A
INEAR MPLIFIER
(
BAND DATA CABLE Supplied w/VL-1000
CONTROL CABLE (
ALC CABLE ( Supplied w/VL-1000 )
M
ANUAL
I
NTERCONNECTIONS
I
NTERCONNECTIONS
To link the FT-2000 and VL-1000 Power
switches, set the VL-1000 REMOTE switch to
the "ON" position.
ANTENNA CABLE ( Not Supplied )
ANT 1
ANT 2
ANT 3
ANT 4
)
)
Supplied w/VL-1000
INPUT 1
REMOTE
PTT 1
ON
OFF
PTT 2
BAND DATA 1
INPUT 2
ALC 1
ALC 2
DC48V IN
GND
BAND DATA 2
Page 13
CONTROL