Yaesu FT-2000 Operating Manual page 129

Receiver
Circuit Type:
Intermediate Frequencies:
Sensitivity (RF AMP 2 "ON"):
Squelch Sensitivity:
(RF AMP 2 "ON")
Selectivity (–6/–60 dB):
Image Rejection:
Maximum Audio Output:
Audio Output Impedance:
Conducted Radiation:
Specifications are subject to change, in the interest of technical improvement, without notice or obligation, and are
guaranteed only within the amateur bands.
FT-2000 O
PERATING
Main (VFO-A); Triple-conversion superheterodyne
Sub (VFO-B); Double-conversion superheterodyne
Main (VFO-A); 69.450 MHz/450 kHz/30 kHz (24 kHz for AM/FM),
Sub (VFO-B); 40.455 MHz/455 kHz
SSB (2.4 kHz, 10 dB S+N/N)
6 μV (0.1 - 1.8 MHz)
0.2 μV (1.8 - 30 MHz)
0.125 μV (50 - 54 MHz)
AM (6 kHz, 10 dB S+N/N, 30 % modulation @400 Hz)
3.2 μV (0.1 - 1.8 MHz)
2 μV (1.8 - 30 MHz)
1 μV (50 - 54 MHz)
FM (BW: 15 kHz, 12 dB SINAD)
0.5 μV (28 - 30 MHz)
0.35 μV (50 - 54 MHz)
There is no specification in frequency ranges not listed.
SSB/CW/AM
2 μV (0.1 - 30 MHz)
2 μV (50 - 54 MHz)
FM
1 μV (28 - 30 MHz)
1 μV (50 - 54 MHz)
There is no specification in frequency ranges not listed.
Main (VFO-A)
Mode
CW/RTTY/PKT
SSB
AM
FM
(WIDTH: Center, VRF: OFF)
Sub (VFO-B)
Mode
CW/RTTY/PKT
SSB
AM
FM
70 dB or better (160 - 10m Amateur bands)
60 dB or better (6m Amateur band)
2.5 W into 4 Ohms with 10% THD
4 to 8 Ohms (4 Ohms: nominal)
Less than 4000 μμW
M
ANUAL
S
PECIFICATIONS
–6 dB –60 dB
0.5 kHz or better 750 Hz or less
2.4 kHz or better 3.6 kHz or less
6 kHz or better 15 kHz or less
15 kHz or better 25 kHz or less
–6 dB –60 dB
1.1 kHz or better 3.0 kHz or less
2.2 kHz or better 4.5 kHz or less
6 kHz or better 25 kHz or less
12 kHz or better 30 kHz or less
Page 127