Questions And Answers - Gigaset SL78H User Manual

Questions and answers

Questions and answers
If you have any questions about using your
phone, visit us at www.gigaset.com/service
any time. The table below contains a list of
common problems and possible solutions.
Registration or connection problems with
a Bluetooth headset.
¥
Reset the Bluetooth headset (see the user
¥ guide for your headset).
Delete registration data from the handset
¥
when deregistering the device (
Repeat the registration process (
The display is blank.
¥
1. The handset is not switched on.
Press and hold the End Call key
2. The battery is dead. ¥
¢
Recharge the battery or replace it
( page 8).
No Base flashes in the display.
1. The handset is outside the range of the base
¥
station.
Move the handset closer to the base
station.
The base station's range is reduced because
¥
Eco mode is activated.
Deactivate Eco mode (
reduce the distance between the handset
and the base station.
¥
2. The base station is not turned on.
Check the base station power adapter.
46
¢
¢
page 39).
page 39).
a
.
¢
page 34) or
Please register handset
"
play.
Handset has not yet been registered to the base
¥
station or has been de-registered.
Register the handset (
Handset does not ring.
¥ The ringer is deactivated.
Activate the ringer (
The other party cannot hear you.
§Mute§
You have pressed the
¥ The handset is on mute.
Reactivate the microphone (
You will hear an error tone when pressing a key
(descending tone sequence).
¥
Action has failed/invalid input.
Repeat the operation.
Watch the display, and refer to the user guide
if necessary.
Exclusion of liability
Some displays may contain pixels
(picture elements), which remain
activated or deactivated. As a pixel is
made up of three sub-pixels (red, green,
blue), it is possible that pixel colors may
vary.
This is completely normal and does
not indicate an error.
" flashes in the dis-
¢
page 10).
¢
page 43).
Display key.
¢
page 26).