Using Bluetooth Devices - Gigaset SL78H User Manual

Using Bluetooth devices

When the room monitor is activated, the idle
display appears as follows:
i V
INT 1
Á
07:15am
2009
Oct
Room Monitor active
9725551234
OFF Options
Changing the set destination
number
É
¢ ¢
v
Room Monitor
¤
Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
¢
( page 37).
Cancel/deactivate room monitor
Press the End Call key a to cancel the call
when the room monitor is activated.
In idle status, press the Display key
deactivate room monitor mode.
Deactivating room monitor calls
remotely
Requirements: The phone must support
touch-tone dialing, and the room monitor
should be set to an external destination
number.
¤
Accept a call at the handset acting as the
room monitor and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. All other room monitor
settings (e.g., no ringer) on the handset are
retained until you press the Display key
on the handset.
To reactivate the room monitor function
with the same phone number:
¤
Reactivate and save with
¢
( page 37).
38
§OFF§
to
§OFF§
§Save§
Using Bluetooth devices
Your Gigaset SL78H handset can communi-
cate wirelessly with other devices using
Bluetooth™ technology.
Before you can use your other Bluetooth
devices, you must first activate Bluetooth
and then register the devices to the handset.
You can register one Bluetooth headset to
the handset. You can also register up to five
data devices (PC, PDA) to send and receive
directory entries as vCards or exchange data
¢
with the computer (
Area codes (international and local area
codes) must be saved on the phone to use
¢
the numbers again (
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Please note
u
On your handset, you can operate
headsets that have the headset or
handsfree profile. Where both pro-
files are available, the handsfree pro-
file is used for communication.
u
It can take up to five seconds to create
a connection between your handset
and a Bluetooth headset. This applies
both when a call is accepted using the
headset or transferred to the headset,
and when a number is dialed from the
headset.
Activating/deactivating Bluetooth
mode
ò
¢ ¢
v
Activation
§Change§
Press to activate or deactivate Blue-
tooth mode (³ = activated).
In idle status, the ò icon shows that Blue-
tooth mode is activated (
page 49).
page 45).
¢
page 2).