Tyre Pressure Monitoring; Save Tyre Pressure Values - Skoda Citigo Operating Instructions Manual

Hide thumbs Also See for Citigo:
Table of Contents

Advertisement

WARNING (Continued)
If the laser sensor is damaged or faulty.
When the vehicle is on a rolling test bench.
When the windscreen is damaged in the region of the laser sensor.
For example, if the charge extends to the roof rack over the front edge of
the roof.

Tyre pressure monitoring

Introduction
This chapter contains information on the following subjects:

Save tyre pressure values

The tyre pressure monitoring function (hereinafter referred to only as a sys-
tem) monitors the tyre pressure while driving.
If the rolling circumference of a wheel is changed, the warning light
instrument cluster illuminates and an audible signal sounds.
Information on the procedure for the notification of change of tyre inflation
pressure
» page
35.
The system can only function properly if the tyres have the prescribed inflation
pressure and these pressure values are stored in the system.
WARNING
Having the correct tyre inflation pressure is always the driver's responsi-
bility. Tyre pressure should be checked regularly
The system cannot warn in case of very rapid tyre inflation pressure loss,
e.g. in case of sudden tyre damage.
89
in the
» page
115.
Save tyre pressure values
Read and observe
on page 89 first.
Procedure for storing the tyre pressure values
Inflate all the tyres to the specified pressure.
Switch on the ignition.
Press the symbol key 
» Fig. 92
The warning light
in the instrument cluster illuminates.
An acoustic signal and the control indicator provide information about the
storage of the tyre pressure values.
Press the symbol key  .
Always save the tyre pressure values in the system if one of the following
events occurs.
Change of tyre inflation pressure.
Change one or more wheels.
Change in position of a wheel on the vehicle.
Illumination of the warning light
WARNING
Before storing the pressures, the tyres must be inflated to the specified in-
flation pressure
» page
115. If the wrong pressure valuesare stored, the
system may not issue any warnings, even if the tyre pressure is too low.
CAUTION
Save the tyre pressure values every 10,000 km or 1x annually to ensure correct
system functioning.
Fig. 92
Key for storing the pressure val-
ues
and hold.
in the instrument cluster.
Assist systems
89

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents