Replacing the windscreen wiper blades
Read and observe
and
When in the rest position, the wiper arms cannot be fold down from the wind-
screen. Before replacing the windscreen wiper blade, put the windscreen wip-
er arms into the service position.
Service position for changing wiper blades
›
Closing the bonnet.
›
Switch the ignition on and off again.
›
Then press the windscreen wiper lever into position
within 10 seconds – the wiper arms move into the service position.
Removing the wiper blade
›
Raise the windscreen wiper arm from the rear window and slightly tilt the
windscreen wiper blade towards the wiper arm, arrow
›
Hold the windscreen wiper arm at the top end.
›
Press the locking button
and remove the wiper blade in the direction of
A
arrow
.
2
Attaching the wiper blade
›
Push the windscreen wiper blade until the stop and it locks in place.
›
Check that the wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
›
Turn on the ignition and press the windscreen wiper lever into position
» Fig. 41
on page 50 ; the windscreen wiper arms move to the home position.
132
Do-it-yourself
Fig. 123
Windscreen wiper blade
on page 131 first.
» Fig. 41
4
» Fig.
1
Replacing the rear window wiper blade
Read and observe
Removing the wiper blade
›
Raise the windscreen wiper arm from the rear window and slightly tilt the
windscreen wiper blade towards the wiper arm, arrow
›
Hold the windscreen wiper arm at the top end.
›
Press the locking button
arrow
.
2
on page 50
Attaching the wiper blade
›
Push the windscreen wiper blade until the stop and it locks in place.
›
Check that the wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
123.
4
Fig. 124
Rear window wiper blade
and
on page 131 first.
1
and remove the wiper blade in the direction of
A
» Fig.
124.