Grandstream Networks GXP2130 Administration Manual page 60

Config File Prefix
Config File Postfix
Allow DHCP Option 43
and Option 66 Override
Server
Allow DHCP Option 120
to override SIP Server
3CX Auto Provision
Automatic Upgrade
Hour of the Day (0-23)
Day of the Week (0-6)
Authenticate Conf File
Download Device
Configuration
Upload Device
Configuration
Maintenance -> Syslog
Syslog Server
Syslog Level
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.16
with the matching encrypted postfix will be downloaded and flashed into the
phone.
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted prefix will be downloaded and
flashed into the phone.
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted postfix will be downloaded and
flashed into the phone.
Default setting is "Yes". DHCP option 66 originally was only designed for
TFTP server. Later on it was extended to support an HTTP URL. GXP
phones support both TFTP and HTTP server via option 66. Users can also
use DHCP option 43 vendor specific option to do this. DHCP option 43
approach has priorities.
Enables DHCP Option 120 from local server to override the SIP Server on
the phone. The default setting is "No".
Enables automatic provision feature on the phone when 3CX is used as the
SIP server. The default setting is "Yes".
Enables automatic upgrade and provisioning. The default setting is "No".
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Authenticates configuration file before acceptance. The default setting is
"No".
Click to download phone's configuration file in .txt format.
Upload configuration file to phone.
The URL or IP address of the syslog server for the phone to send syslog to.
Selects the level of logging for syslog. The default setting is "None". There
are 4 levels: DEBUG, INFO, WARNING AND ERROR.
Syslog messages are sent based on the following events:

Product model/version on boot up (INFO level);

NAT related info (INFO level);

sent or received SIP message (DEBUG level);
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
Page 58 of 81