Grandstream Networks GXP2130 Administration Manual page 48

Enterprise ip phone
Hide thumbs Also See for GXP2130:
Table of Contents

Advertisement

Headset Type
Always Ring Speaker
Headset TX gain
Headset RX gain
Handset TX gain
Settings -> LCD Display
Backlight Brightness: Active
Backlight Brightness: Idle
Disable Missed Call
Backlight
Wallpaper Source
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.16
 When there is an incoming call, press HEADSET button to pick
up the call using headset.
 When there is an active call using headset, press HEADSET
button to hang up the call.
 When Speaker/Handset is being used in dialing/talking status,
press EADSET button to switch to headset. Press it again to
hang up the call. Or press speaker/Handset to switch back to
the previous mode.
Toggle Headset/Speaker:
 When the phone is in idle, press HEADSET button to switch to
Headset mode. The headset icon will display on the left side of
the screen. In this mode, if pressing Speaker button or Line key
to off hook the phone, headset will be used.
 When there is an active call, press HEADSET button to toggle
between Headset and Speaker.
Selects whether the connected headset is normal RJ11 headset,
Plantronics EHS headset.
Configures to enable or disable the speaker to ring when headset is used
on "Toggle Headset/Speaker" mode. If set to "Yes", when the phone is
in Headset "Toggle Headset/Speaker" mode, both headset and speaker
will ring on incoming call. The default setting is "No".
Configures the transmission gain of the headset. The default value is
0dB.
Configures the receiving gain of the headset. The default value is 0dB.
Configures the transmission gain of the handset. The default value is 0
dB.
Configures the LCD brightness when the phone is active. Valid range is
10 to 100 where 100 is the brightest. Default value is 100.
Configures the LCD brightness when the phone is idle. Valid range is 10
to 100 where 0 is off and 100 is the brightest. Default value is 60.
If set to "Yes", the screen will turn off the LCD backlight when there is a
missed call on the phone. The default setting is "No".
Specifies the wallpaper source mode: Default, Download, USB and
Uploaded. User could upload a wallpaper source into your phone, or
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
Page 46 of 81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gxp2140Gxp2160

Table of Contents