Grandstream Networks GXP2130 Administration Manual page 41

Delayed Call Forward
Wait Time
Enable Call Features
Call Log
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.16
Block any number of leading digits 1900 or add prefix 1617 for any dialed 7
digit numbers;

Example 3: {1xxx[2-9]xxxxxx | <2=011>x+}
Allows any number with leading digit 1 followed by a 3 digit number, followed
by any number between 2 and 9, followed by any 7 digit number OR Allows
any length of numbers with leading digit 2, replacing the 2 with 011 when
dialed.
Example of a simple dial plan used in a Home/Office in the US:
{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):

^1900x. - prevents dialing any number started with 1900;

<=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers
by dialing 7 numbers and 1617 area code will be added automatically;

1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11
digits length;

011[2-9]x - allows international calls starting with 011;

[3469]11 - allows dialing special and emergency numbers 311, 411, 611
and 911.
Note:
In some cases where the user wishes to dial strings such as *123 to activate
voice mail or other applications provided by their service provider, the *
should be predefined inside the dial plan feature. An example dial plan will
be: { *x+ } which allows the user to dial * followed by any length of numbers.
Defines the timeout (in seconds) before the call is forwarded on no answer.
The default value is 20 seconds. The valid range is 1 to 120.
The default setting is "Yes". When enabled, call features using star codes
will be supported locally. If set to "No", Call Features and DND options under
LCD menu are supported, ForwardAll softkey will not be displayed in LCD
for Account 1, and also the feature code will need to be provided from the
server side.
Configures Call Log setting on the phone. You can log all calls, only log
incoming/outgoing calls (missed calls will not be logged), or disable call log.
The default setting is "Log All Calls".
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
Page 39 of 81