Section Ii. Getting Ready To Sew Connecting The Power Supply; Operating Instructions - Janome dc2015 Instruction Book

q
t
q
SECTION II. GETTING READY TO SEW
Connecting the Power Supply
• Using the foot control
Turn off the power switch q.
Insert the foot control plug w into the foot control jack e.
Insert the machine plug r into the power inlet t.
Insert the power supply plug y into the wall outlet u.
Turn on the power switch q.
The foot control sign i will be displayed when the foot
control is connected to the machine.
e
q Power switch
w Foot control plug
e Foot control jack
w
r Machine plug
t Power inlet
r
y Power supply plug
u Wall outlet
u
i Foot control sign
While in operation, always keep your eyes on the
sewing area and do not touch any moving parts such
as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug from the
y
i power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control, otherwise
the machine will run inadvertently.
• Using the start/stop button
Turn off the power switch q.
Insert the machine plug w into the power inlet e.
Insert the power supply plug r into the wall outlet t.
Turn on the power switch q.
q Power switch
w Machine plug
e Power inlet
r Power supply plug
t Wall outlet
NOTE:
The start/stop button does not work when the foot
e
control is connected.
w

Operating Instructions:

The symbol "O" on a switch indicates the "off" position of
the switch.
t
For the U.S.A. and Canada only
Polarized plug (one blade wider than the other):
To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If it does not fit
fully in the outlet, reverse the plug. If it still does not fit,
r
contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.
4
WARNING: