Lcd Display; Selecting Stitch Patterns - Janome dc2015 Instruction Book

q
w
e
z
x
c
r t

LCD Display

The LCD display shows the following information when
the machine is turned on.
q Identification letter for recommended foot
w Stitch pattern number
e Cursors
r Stitch width
t Stitch length

Selecting Stitch Patterns

z Press the cursor buttons
under the stitch pattern number.
The cursors appear under both digits when turning
the power on.
x Press the value set buttons
pattern number until the pattern number of the
desired stitch is indicated.
The number will increase or decrease by 1 each time
you press the value set button.
c Press the button to move the cursor under the tens
digit of the stitch pattern number.
The number will increase or decrease by 10 each
time you press the value set button.
Stitch Patterns
18
to move the cursor
to change the stitch