Needle Plate - Janome dc2015 Instruction Book

e
q
w
[1.0] [2.2]
q
w e
q
w
q
[5.0]
r

Needle Plate

The seam guides on the needle plate and the hook
cover help you to measure seam allowance. The
numbers on the needle plate indicate the distance
between the center needle position q and the edge
of the fabric w.
q Center needle position
w Edge of the fabric
10 20 30 40 50 1/2 5/8 3/4 1
Number
Distance
1.0 2.0 3.0 4.0 5.0
(cm)
Distance
— — — — —
(inch)
The front seam guides e are marked at 1/4˝, 3/8˝ and
5/8˝ from the center needle position q.
e Front seam guides
• Adjusting the stitch length
Press the cursor buttons
the stitch length value "2.4" w (default setting).
Press the button to decrease stitch length.
Press the button to increase stitch length.
The stitch length can be varied from 0.0 to 5.0.
q Cursor
w Stitch length (2.4)
NOTE:
Reverse stitch length cannot be set longer than 4.0.
• Adjusting the needle drop position
The needle drop position can be adjusted for straight
stitch patterns 00 - 04, and 30 - 32.
Press the cursor buttons
the stitch width value "3.5" q (default setting).
Press the button to move the needle to the left w.
Press the button to move the needle to the right r.
q Stitch width (3.5)
w Left (0.0)
e Middle (3.5)
r Right (7.0)
22
1 1/2
— — — — —
1/2 5/8 3/4 1 1 1/2
to move the cursor q under
to move the cursor under
2
—
2