Date And Time - ZyXEL Communications NWA90AX User Manual

The following table describes the labels in this screen.
Table 61 Configuration > System > Host Name
LABEL
System Name
System Location
Domain Name
Apply
Reset

15.3 Date and Time

For effective scheduling and logging, the Zyxel Device system time must be accurate. The Zyxel Device
has a software mechanism to set the time manually or get the current time and date from an external
server.
To change your Zyxel Device's time based on your local time zone and date, click Configuration >
System > Date/Time. The screen displays as shown. You can manually set the Zyxel Device's time and
date or have the Zyxel Device get the date and time from a time server.
Chapter 15 System
DESCRIPTION
Choose a descriptive name to identify your Zyxel Device device. This name can be up to 64
alphanumeric characters long. Spaces are not allowed, but dashes (-) underscores (_) and
periods (.) are accepted.
Specify the name of the place where the Zyxel Device is located. You can enter up to 60
alphanumeric and '()' ,:;?! +-*/= #$%@ characters. Spaces and underscores are allowed. The
name should start with a letter.
Enter the domain name (if you know it) here. This name is propagated to DHCP clients
connected to interfaces with the DHCP server enabled. This name can be up to 254
alphanumeric characters long. Spaces are not allowed, but dashes "-" are accepted.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
NWA50AX/NWA90AX/NWA55AXE Series User's Guide
147