Kyocera 6550ci Operation Manual page 480

Error Message
Please select at least
one item.
Removable memory
error.*
Removable memory
is full.*
Replace all originals
and press [Continue].
Replace the waste
toner box.
Remove originals in
the document
processor.
Scanner memory is
full.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
Did you select an item in the
item selection screen?
Is writing to a removable
memory prohibited?
—
—
—
Is the waste toner box full?
Are there any originals left in
the document processor?
—
Corrective Actions
Select an item.
An error occurred in the removable
memory. The job stopped. Press
[End].
Possible error codes are as follows:
01: Connect a removable memory
that can be written to.
An error occurred in the removable
memory. The job stopped. Press
[End].
Possible error codes are as follows:
01: The amount of data that can be
saved at once has been exceeded.
Restart the system or turn the
power OFF/ON. If the error still
occurs, the removable memory is
not compatible with the machine.
Use the removable memory
formatted by this machine. If the
removable memory cannot be
formatted, it is damaged. Connect
a compatible removable memory.
This job is canceled. Press [End].
Insufficient free space in the
removable memory. Delete unneeded
files.
Remove originals from the document
processor, put them back in their
original order, and place them again.
Press [Continue] to resume printing.
Press [Cancel] to cancel the job.
Replace the waste toner box.
Remove originals from the document
processor.
Scanning cannot be performed due to
insufficient memory of the scanner.
Follow the instructions on the touch
panel.
12-14
Troubleshooting
Reference
Page
―
—
7-20
—
2-49
11-5
—
—