Kyocera 6550ci Operation Manual page 478

Error Message
Failed to store job
retention data.
Folding tray is full of
paper.
Hard Disk error.
Incorrect account ID.
Incorrect box
password.
Incorrect Login User
Name or Password.
Incorrect password.
Install the punch
waste box.
Install the waste toner
box.
Job Accounting
restriction exceeded.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
—
Is the acceptable storage
capacity exceeded?
—
—
—
—
Is an incorrect password
entered?
—
—
Is the acceptable printing
count restricted by Job
Accounting exceeded?
Corrective Actions
The job is canceled. Press [End].
Remove the paper. Printing then
resumes.
An error has occurred on the hard
disk. Job is canceled. Press [End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, divide the file
into smaller files. If the error
occurs after the file is divided, the
hard disk is damaged. Execute
[System Initialization].
04: Insufficient space on the hard
disk to complete this operation.
Move data or delete unneeded
data.
The account ID was incorrect when
processing the job externally. The job
is canceled. Press [End].
The box password was incorrect
when processing the job externally.
The job is canceled. Press [End].
The login user name or password
was incorrect when processing the
job externally. The job is canceled.
Press [End].
Enter the correct password.
Follow the instructions on the touch
panel and install the punch waste
box.
The waste toner box is not installed
correctly. Set it correctly.
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
This job is canceled. Press [End].
12-12
Troubleshooting
Reference
Page
—
—
—
—
—
—
―
—
11-5
—