Kyocera 6550ci Operation Manual page 472

Symptom
Performing Color
Registration...
appears during
continuous copying
and copying stops.
Cannot send via SMB.
Checkpoints
The machine is carrying out a
calibration process to ensure
color stability.
Is the network cable
connected?
Have the network settings for
the equipment been
configured properly?
Have the folder sharing
settings been configured
properly?
Has the SMB protocol been
set to [On]?
Has the [Host Name] been
entered properly? *
Has the [Path] been entered
properly?
Has the [Login User Name]
been entered properly? **
Has the same domain name
been used for the [Host
Name] and [Login User
Name]?
Has the [Login Password]
been entered properly?
Corrective Actions
This is not a fault.Resume
continuous copying when the
calibration process ends.
Connect the correct network cable
securely.
Configure the TCP/IP settings
properly.
Check sharing settings and access
privileges under the folder
properties.
Set the SMB protocol setting to
[On].
Check the name of the computer to
which data is being sent.
Check the share name for the
shared folder.
Check the domain name and login
user name.
Delete the domain name and
backslash ("\") from the [Login
User Name].
Check the login password.
12-6
Troubleshooting
Reference
Page
—
2-3
9-94
3-25
3-25
3-25
3-25
3-25
3-25
3-25