File Format
Select the default file type to send the scanned originals. The available default settings are shown below.
Item
PDF
TIFF
JPEG
XPS
High Comp. PDF
NOTE:
Refer to page 6-14 for file formats.
Use the procedure below to select the default file format.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default file format.
4
Press [OK].
File Separation
Select the default file separation setting. The available default settings are shown below.
Item
Off
Each Page
NOTE:
Refer to page 6-15 for file separation.
Use the procedure below to select the default file separation.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default for [Off] or [Each Page].
4
Press [OK].
Send files in PDF format.
Send files in TIFF format.
Send files in JPEG format.
Send files in XPS format.
Send files in High Comp. PDF format (refer to page 6-16).
], [Next] of Function Defaults and then [Change] of File Format.
No file separation performed (all the pages are compiled in one file).
Each scanned page is created into a separate file.
], [Next] of Function Defaults and then [Change] of File Separation.
9-20
Default Setting (System Menu)
Description
Description