Appendix; Advanced Bios Setup Menu - ASROCK P4VT8+ User Manual

This section will introduce you the following BIOS Setup menus: "Advanced,"
"Security," "Power," "Boot," and "Exit."

1. Advanced BIOS Setup Menu

Spread Spectrum:
This field should always set to [Disabled] for better system stability.
CPU Host Frequency:
This shows current CPU host frequency of the installed motherboard.
CPU Ratio Selection:
CPU Ratio is the multiple that times the frontside bus frequency will equal
the core speed of the installed processor. Whether the option is open or locked
is determined by the installed processor.
DRAM Frequency:
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assigns appropriate frequency automatically. You may also select other
value as operating frequency: [100MHz (DDR 200)], [133MHz (DDR 266)],
[166MHz (DDR 333)], [200MHz (DDR 400)].
Flexibility Option:
Default is [Disabled], When it's Enabled, it will allow better tolerance for
memory compatibility. There is a Hot-Key also, it will automatic to [Enabled]
when you press [Home] during the POST.
2 6
This Manual: http://www.manuallib.com/file/2595543
Appendix: Advanced BIOS Setup
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced Security
Main
Spread Spectrum
CPU Host Frequency
Actual Frequency
CPU Ratio Selection
DRAM Frequency
Flexibility Option
Chipset Configuration
Resource Configuration
Peripheral Configuration
System Hardware Monitor
F1:Help :Select Item
Esc:Exit
:Select Menu
Exit
Power Boot
Disabled
Disabled
133MHz
Locked
Auto
Disabled
+/-:Change Values
Enter:Select Sub-Menu
[ Setup Help ]
<Enter> to enable or
disable the feature of
spread spectrum.
F9:Setup Defaults
F10:Save & Exit