Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(4-conductor)
(Optional)
USB 2.0 Header
(9-pin USB67)
(see p.7 item 19)
Shared USB 2.0 Header
(9-pin USB4_5)
(see p.7 item 31)
Infrared Module Connector
(5-pin IR1)
(see p.7 item 18)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.7 item 30)
(AUX1: see p.7 item 29)
Front Panel Audio Connector
(9-pin AUDIO1)
(see p.7 item 28)
This Manual: http://www.manuallib.com/file/2595543
connect to the SATA
HDD power connector
USB_PWR
P-7
P+7
GND
1
GND
P+6
P-6
USB_PWR
USB_PWR
P-5
P+5
1
P+4
P-4
USB_PWR
IRTX
+5V
1
GND
IRRX
CD-L
GND
GND
CD-R
AUX-L
GND
GND
AUX-R
GND
+5VA
1
MIC-POWER
MIC
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
ASRock I/O Plus
6 default USB 2.0 ports on the
DUMMY
rear panel. If the rear USB ports
are not sufficient, this USB 2.0
header (USB67) is available to
support 2 additional USB 2.0
ports.
This USB4_5 header is shared
with the USB 2.0 ports 4,5 on
GND
DUMMY
the rear panel. When using the
front panel USB ports by
GND
attaching the front panel USB
cable to this header (USB4_5),
the rear panel USB ports 4,5
will not be able to function.
This connector supports an
DUMMY
optional wireless transmitting
and receiving infrared module.
These connectors allow you
CD1
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
AUX1
tuner card, or MPEG card.
This is an interface for front
BACKOUT-R
panel audio cable that allows
BACKOUT-L
convenient connection and
control of audio devices.
AUD-OUT-L
GND
AUD-OUT-R
TM
provides you
1 5
Advertisement
Table of Contents
