Table of Contents
Advertisement
Chipset Configuration:
AGP Mode
AGP Aperture Size
AGP Fast Write
PCI Delay Transaction
USB Controller
USB Device Legacy Support
DRAM CAS# Latency
Hyper-Threading Technology
DRAM Voltage
AGP Voltage
F1:Help
Esc:Previous Menu
AGP Mode: The default value of this feature is set to [Auto]. If you install an
8X-AGP card on this motherboard, you may select [Auto], [8X] or [4X]
as the AGP mode. If the installed AGP card is a 4X-AGP card, then you may
set the AGP mode as [Auto], [4X], [2X], or [1X].
AGP Aperture Size: It refers to a section of the PCI memory address range
used for graphics memory. It is recommended to leave this field at the
default value unless the installed AGP card's specifications requires other
sizes.
AGP Fast Write: This allows you to enable or disable the feature of AGP fast
write protocol support.
PCI Delay Transaction: Enable PCI Delay Transaction feature will free the PCI
Bus when the CPU is accessing 8-bit ISA cards. Disable this feature
when using ISA cards that are not PCI 2.1 compliant.
USB Controller: Use this to enable or disable the use of USB controller.
USB Device Legacy Support: Use this to enable or disable the support to
emulate legacy I/O devices such as mouse, keyboard,... etc.
DRAM CAS# Latency:
This is used to adjust the means of memory accessing. Configuration options:
[Auto], [2T], [2.5T], [3T]. Please note that not all the DDR DIMMs can support
CAS latency=3T.
Hyper-Threading Technology:
To enable this feature, it requires a computer system with an Intel
Pentium
operating system that includes optimization for this technology, such as
Microsoft
Linux kernel version 2.4.18 or higher. This option will be hidden if the
current CPU does not support Hyper-Threading technology.
This Manual: http://www.manuallib.com/file/2595543
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
Chipset Configuration
:Select Item
Enter:Select
®
4 processor that supports Hyper-Threading technology and an
®
®
Windows
XP. Set to [Auto] if using Microsoft
[ Setup Help ]
<Enter> to select AGP
Auto
mode.
128MB
Disabled
Disabled
Enabled
Disabled
Auto
Auto
Normal
High
F9:Setup Defaults
+/-:Change Values
F10:Save & Exit
Sub-Menu
®
®
Windows
XP, or
2 7
Advertisement
Table of Contents
