Appendix; Advanced Menu - ASROCK P4VX4 User Manual

Appendix: Advanced BIOS Setup
This section will introduce you the following BIOS Setup menus: "Advanced,"
"Security," "Power," "Boot," and "Exit."
1. Advanced BIOS Setup Menu
Main Advanced
Spread Spectrum
CPU Host Frequency
Actual Frequency
CPU Ratio Selection
DRAM Frequency
Chipset Configuration
Resource Configuration
Peripheral Configuration
System Hardware Monitor
F1:Help
Esc:Exit
Spread Spectrum:
This field should always set to [Disabled] for better system stability.
CPU Host Frequency:
This shows current CPU host frequency of the installed motherboard.
CPU Ratio Selection:
CPU Ratio is the multiple that times the frontside bus frequency will equal
the core speed of the installed processor. Whether the option is open or locked
is determined by the installed processor.
DRAM Frequency:
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assigns appropriate frequency automatically. You may also select other
value as operating frequency: [100MHz (DDR 200)], [133MHz (DDR 266)],
[166MHz (DDR 333)], [200MHz (DDR 400)].
NOTE: Please pay attention to the specifications of the installed memory
module(s). The DRAM frequency will be set equal or faster than
the CPU frequency.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Security
Power Boot
Disabled
Disabled
133MHz
Locked
Auto
:Select Item +/-:Change Values
:Select Menu
Enter:Select
Exit
[ Setup Help ]
<Enter> to enable or
disable the feature of
spread spectrum.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu