Setting the Element Heat
Level
Single Element Control Knob
Dual Element Control Knob
Operation - Oven
About the Oven
Operation
Setting the Cooking Mode
and Temperature
English 12
To turn on a single element, push in on the control knob and turn in either direc-
tion to the desired heat setting.
To turn ON the small, inner element, push in on the control knob and turn it coun-
terclockwise. Set to desired heat level.
To turn ON both the inner and outer elements together, push in on the control
knob and turn it clockwise to the desired setting.
This section explains how to operate the oven. See "Getting the Most Out of Your
Oven" on page 16 for guidelines to improve oven results.
CAUTION
Do not use aluminum foil or protective liners to line any part of an appli-
ance, especially surface unit drip bowls or oven bottom. Installation of
these liners may result in a risk of electric shock or fire.
Note: To back out of a current mode, press OFF. (Selecting OFF when not setting
the cooking mode will turn the oven off.)
Element Location
Figure 4: Single Element Burner Knob
Inner Element
Outer Element
Element Location
Figure 5: Dual Element Burner Knob