Set The Day And Time - VTech VT1040 User Manual

Set the day and time

1. Press the Left soft key
2. Press or until the display shows
OK DATE & TIME
press the soft key.
soft key again.
3. Press or until the display shows
OK
the soft key.
4. The current time setting is displayed, enter 2 digits for the hour
and 2 digits for the minuteusing the 24hr format (eg for 10.54pm,
press
hear a confirmation tone.
SET DATE
5. Press and
OK
Press the soft key.
6. The current date setting is displayed, enter 2 digits for the day,
2 digits for the month and 2 digits for the year using the dd-mm-yy
format (eg for 23rd May 2008 press
) and press the
confirmation tone
7. Press and hold the
Your VT1040 is now ready for use.
to open the main menu.
HS SETTINGS
is displayed, press the
SET TIME
OK
) and press the soft key, you will
is displayed.
OK
soft key, you will hear a
soft key to return to standby.
and
OK
and press
Getting started
4