Base Settings; Change Pin Code; Dial Mode - VTech VT1040 User Manual

Base settings

Change PIN code

Your System PIN can help prevent unauthorised users from
changing the settings on your phone.
1. Press the Left soft key
2. Press or until the display shows
OK
and press .
3. Press or until
ENTER PIN?
select. is displayed.
4. Enter the existing PIN code using the keypad and press
NEW PIN?
is displayed.
5. Enter a new 4 digit PIN code using the keypad and press
CONFIRM?
is displayed.
6. Re-enter the new PIN code and press
confirmation tone.
7. Press and hold to return to standby.

Dial mode

Your VT1040 is pre-set to tone dialling (DTMF).
You can set the dial mode to pulse dialling if your
switchboard requires.
1. Press the Left soft key
to open the main menu.
BS SETTINGS
CHANGE PIN
is displayed, press
OK
. You hear a
to open the main menu.
The default PIN setting is 0000.
OK
to
OK
.
OK
.
Tone is the default setting.
You should only have
to change this if connected to
a switchboard that requires
Pulse dialling.
30