Machine Description; Machine Parts; Control Panel; Technical Data - ECM Barista A2 User Manual

3

MACHINE DESCRIPTION

3.1 Machine parts

4
6
8
9 2
7
Barista A2
Caution!
Danger of injury: The following parts are hot or may become hot:
• area around the steam and hot water wands
• steam and hot water wands
• porta filter
• brew groups
• body (upper part and side frames)

3.2 Control panel

All lamps are illuminated when the machine is operational. After having pressed a button, only that respective lamp
will be illuminated.
1 2

3.3 Technical data

Barista A2
Voltages: 2 phases, 230 V each (different voltages available upon request)
Power: 4.000 W
Water tank:
14.0 L
Measurements:
W x D x H / 730 mm x 537 mm x 520 mm
Barista A3
Voltages:
2 phases, 230 V each (different voltages available upon request)
Power: 5.000 W
Water tank:
21.0 L
Measurements:
W x D x H / 940 mm x 537 mm x 520 mm
1
4
8
3
3 4 5
1 Cup heating tray
2 Water level indicator boiler
3 Boiler / pump pressure gauge
4 Control panel
5 Hot water dispenser
10
6 Steam lever valve with steam wand left
7 Drip tray (drip-grids, not pictured)
8 Brew groups
5
9 On / Off switch 0/1/2
0= Off/ 1=Pump/ 2=Pump + Heater
10 Steam lever valve with steam wand right
Automatic programming of doses and quantity
of cups:
6
1 Programming button / manual
2 Single espresso
3 1 large cup
4 Double espresso
5 2 large cups
6 Hot water
17
ENGLISH