Testing The Playback Function - EverFocus EMN2120 User Manual

6.2.2 Testing the Playback Function

1. To test the Playback function (this is not required), set up a "Manual Trigger" Recording Event by
clicking Event Settings > Event.
2. Give the event a name, like "Test 1".
3. In the "Event Triggered Type" field, click on Manual Trigger.
4. Below this, check "Enable This Event", "Enable Post-trigger Buffer", and "Record to SD Card".
5. To save your settings, click the Create button, and the Event will be listed in the Event List.
6. Look at the "Post-trigger Buffer" at the bottom to make sure the buffer time is set to 10 seconds.
Click the Apply button.
7. Click the LiveView button to go back to the Live View page.
8. Get ready to click the Trigger Event button on the Live View page. Before you do, see if you can
find something in the view screen that will give you a visual time marker. For instance, if you can
get your hand in front of the camera's lens, get ready to count down on your fingers.
21
EMN Series Mini Mobile IP Dome