Live View Window - EverFocus EMN2120 User Manual

5.4

Live View Window

1. Click the
(if connected via Internet), you can reduce the resolution or limit the number of streams. See 7.2.1
Streaming and Audio.
2. Click the
SDHC card (for this function to become active, you have to insert a Micro SD / SDHC card in the Micro
SD / SDHC card slot on the camera. See 6.2 Setting up the Playback Function).
3. Snapshot
Click the Snapshot button to take a snapshot. By default, the snapshot will be saved at C:\EverFocus\.
To change the location, see Record to Local in 7.1.3 Storage.
4. Record
Click the Record button to start / stop recording. By default, the video recordings will be saved at
C:\EverFocus\. To change the location, see Record to Local in 7.1.3 Storage. To change the source
video stream and recording format, see Recording and Snapshot Settings in 7.1.3 Storage. To
configure the Schedule Record setting, see Schedule Settings in 7.3.2 Event.
5. Audio
Click the Audio button to switch on/off the speaker function for listening to the audio from the
camera. To activate the Audio function, the Enable Audio must be selected. See Audio Settings in
7.2.1 Streaming and Audio.
button to display the Live View window. If you experience video feed lag time
button to play back the recorded data directly from the on-camera Micro SD /
15
EMN Series Mini Mobile IP Dome