Dell B3460dn User Manual page 23

Additional printer setup
•
Active NIC is set to Auto. To set this to Auto, navigate to:
> Settings >
Note: Make sure to turn off the printer, then wait for at least five seconds, and then turn the printer back on.
1
From the printer control panel, navigate to:
> Settings >
Wireless Connection Setup >
2
Select a wireless connection setup.
Use
Search for networks
Enter a network name Manually type the SSID.
Wi‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup.
3
Press , and then follow the instructions on the printer display.
Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)
Before you begin, make sure that:
• The access point (wireless router) is WPS certified.
•
A wireless network adapter is installed in the printer and is working properly. For more information, see the
instruction sheet that came with the wireless network adapter.
Using the Push Button Configuration (PBC) method
1
From the printer control panel, navigate to:
> Settings >
Wi‑Fi Protected Setup >
2
Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) method
1
From the printer control panel, navigate to:
> Settings >
Start PIN Method >
2
Copy the eight‑digit WPS PIN.
3
Open a Web browser, and then type the IP address of your access point in the address bar.
> Network/Ports >
> Network/Ports >
To
Show available wireless connections.
Note: This menu item shows all broadcast secured or unsecured SSIDs.
Note: Make sure to type the correct SSID.
>Network/Ports >
> Start Push Button Method >
>Network/Ports >
> Active NIC > > Auto >
> Network [x] > > Network [x] Setup >
> Network [x] > > Network [x] Setup >
> Network [x] > Wireless >
> Wireless >
> Wireless >
> Wi‑Fi Protected Setup >
23
>
>
>