Dell B3460dn User Manual page 117

Troubleshooting
Imaging unit low [84.xy]
You may need to order an imaging unit. If necessary, press
Imaging unit nearly low [84.xy]
If necessary, press
Imaging unit very low, [x] estimated pages remain [84.xy]
You may need to replace the imaging unit very soon. For more information, see the "Replacing supplies" section of the
User's Guide.
If necessary, press
Incorrect paper size, open [paper source] [34]
Try one or more of the following:
• Load the correct size of paper in the tray.
•
From the printer control panel, press
•
Check the tray length and width guides and make sure the paper is loaded properly in the tray.
• Make sure the correct paper size and type are specified in Print Properties or in the Print dialog.
•
Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.
•
Make sure the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, then make sure the
paper is large enough for the data being printed.
• Cancel the print job.
Insert Tray [x]
Insert the indicated tray into the printer.
Insufficient memory to support Resource Save feature [35]
Try one or more of the following:
•
From the printer control panel, press
• Install additional printer memory.
on the printer control panel to clear the message and continue printing.
to clear the message and continue printing.
to clear the message and print using a different tray.
to disable Resource Save, clear the message, and continue printing.
to clear the message and continue printing.
117