Table of Contents
Advertisement
CAUTlON
Flames observed emerging from the heater body are a clear indication that fuel is dangerously contaminated with gasoline
(petrol) or other highly flammable material. If this occurs,
a. Never attempt to move the heater.
b. Call the Fire Department.
c. Use only a class "B" fire extinguisher.
d. Never throw water directly on a burning heater.
OPERATING CONTROLS AND FEATURES
1. Safety Guard:
2. Heat Chamber:
3. Wick Adjuster Knob:
4. Wick Life Extender:
5. Igniter Lever:
Prevents direct touch on the heat chamber, greatly reducing the possibility of accidental contact
burns to the heat chamber.
Permits adjustment of heat output without increasing unwanted combustion materials or
reducing combustion efficiency. This feature increases comfort and convenience while
maximizing fuel savings.
Used to raise and lower wick for heat output adjustment. To extinguish flame turn knob
counterclockwise.
Helps maintain good wick performance.
Battery-powered electrical igniter is brought in contact with to ignite fuel at start-up. NOTE:
Lever should be pushed down gently.
Advertisement
Table of Contents
