1. Manuals
  2. Brands
  3. Toyotomi Manuals
  4. Heater
  5. KS-47B
  6. Operation and maintenance instructions

Toyotomi KS-47B Operation And Maintenance Instructions

Portable kerosene heater
Hide thumbs Also See for KS-47B:
Table of Contents

Advertisement

Quick Links

Download this manual

OPERATION AND MAINTENANCE

INSTRUCTIONS
KS-47B
MODEL
IMPORTANT
READ AND UNDERSTAND INSTRUCTIONS BEFORE USING HEATER. RETAIN INSTRUCTIONS
FOR FUTURE REFERENCE.
SAFETY TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FUEL GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PORTABLE KEROSENE HEATER
CONTENTS
ASSEMBLY AND OPERATION . . . . . . . . . . . . . . 6
CARE AND MAINTENANCE. . . . . . . . . . . . . . . . 11

Advertisement

Table of Contents
loading

Related Manuals for Toyotomi KS-47B

Summary of Contents for Toyotomi KS-47B

  • Page 1: Operation And Maintenance

    PORTABLE KEROSENE HEATER OPERATION AND MAINTENANCE INSTRUCTIONS KS-47B MODEL IMPORTANT READ AND UNDERSTAND INSTRUCTIONS BEFORE USING HEATER. RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. CONTENTS SAFETY TIPS ......1 ASSEMBLY AND OPERATION .
  • Page 2 OPERATING CONTROLS AND FEATURES ..4 REPLACEMENT OF PARTS ....12 SPECIFICATIONS ......5 STORAGE .

  • Page 4: Safety Tips

    Congratulations; you are ready to begin enjoying the benefits of one of the most advanced kerosene (paraffin) heaters ever made. TOYOTOMI, the leader in kerosene (paraffin) heater techonlogy, has tested and refined the KS-47B to assure you of long-term safety and satisfaction. Please study the following instructions, use and care for your heater carefully, and it will SAFETY TIPS serve you well for many years.
  • Page 5 1. Never use any fuel other than clean kerosene (paraffin). Never use gasoline (petrol). Use of gasoline (petrol) can lead to uncontrollable flames resulting in a destructive fire. Even kerosene (paraffin) contaminated with small amounts of gasoline (petrol), or similarly volatile materials, can be hazardous. Never use for kerosene (paraffin) a can that has previously been used for gasoline (petrol), paint thinner, or solvents.
  • Page 6 3. Do not operate heater without protective guards completely attached. 4. Do not use heater to heat or boil water or as a cooking appliance. Do not placecooking utensils, tea kettles or any other object on top of heater while in operation. 5.

  • Page 7: Fuel Guide

    FUEL GUIDE The TOYOTOMI KS-47B is designed for use with high-quality kerosene (paraffin) only. Use of low-quality kerosene (paraffin) will cause wick performance to drop, leading to ”Iow flame” and ”odor problem” conditions. Purchase only kerosene (paraffin) in non-red cans reserved exclusively for kerosene (paraffin) and marked accordingly with the word ”KEROSENE (PARAFFIN)”.
  • Page 8 CAUTlON Flames observed emerging from the heater body are a clear indication that fuel is dangerously contaminated with gasoline (petrol) or other highly flammable material. If this occurs, a. Never attempt to move the heater. b. Call the Fire Department. c.
  • Page 9 Used to check and insure proper seating of the heat chamber after ignition. 9. Heat Chamber Handle: lmproper seating of the heat chamber will cause erratic flame and smoke. SPECIFlCATlONS TOYOTOMI Portable Kerosene (paraffin) Heater Model KS-47B Heat rating 4,600kcal/18,200BTU/h Fuel tank capacity 7.5 liters...
  • Page 10 COMPONENT PARTS REF# PART NAME Guard assembly Carrying handle Top plale Heat chamber assembly Glass cylinder Push ring Cross pin Guard retainer Screw Wick adjuster with pendulum assembly Pendulum assembly Wick adjuster knob Screw 1A Wing nut Igniter unit Igniter coil Screw 3E Battery holder Screw...
  • Page 11 1. REMOVE PACKING MATERIALS Remove all packing materials from your heater and install the guard as follows: CAUTION: Risk of burns. Do not operate heater without guard completely attached. a) Remove the carrying handle, top plate and packing materials. b) Replace the top plate and install carrying handle by inserting end of carrying handle to the guard as per illustration.
  • Page 12 2. Turn the air vent knob on the top of the siphon clockwise to close the air vent. 3. To start the flow of kerosene (paraffin), squeeze the bulb of the siphon vigorouslysix or seven times. Once the flow begins, it is no longer necessary to squeeze the bulb. To avoid overfilling the tank, watch the fuel gauge.
  • Page 13 3. CHECK THE WICK LIFE EXTENDER On your first use of new heater or after replacing the wick, check if the WICK LIFE EXTENDER if it on position 1. If not, relocate the WICK LIFE EXTENDER to position 1 by following the instructions on page 9, ADJUSTMENT OF WICK HEIGHT WITH WICK LIFE EXTENDER.
  • Page 14 NOTE: lf you have fueled your heater for the first time, or if you are refueling it after it has been out of fuel for a long time, you will need to wait about thirty (30) minutes for the wick to become fully saturated before Iighting.

  • Page 15: Care And Maintenance

    NOTE: Do not operate your heater with wick set TOO LOW or TOO HIGH. Doing so will decrease combustion efficiency and increase production of unwanted emissions. When operating heater, be sure wick is high enough to keep the primary heat chamber heated to a uniform red glow from top to bottom. NOTE: AIways observe the heater closely for the first 15-20 minutes after it is lighted to be sure it is properly adjusted.

  • Page 16: Care And Maintenance

    EXTINGUISHING THE FLAME 1. Turn the wick adjuster knob counterclockwise until it stops. Within a fewmoments, the flame will be completely extinguished and the heater will be off. 2. Make sure the flame is out completely. 3. Do not try to relight the heater for at least three (3) minutes after turning it off,as this may cause smoke and odor.

  • Page 17: Replacement Of Parts

    If the wick does not igniter or is hard to ignite, check if the igniter filament is broken. If the igniter coil is found to be defective, replace as described on page 14. REPLACEMENT OF PARTS REPLACING THE WlCK USE ONLY GENUINE TOYOTOMI ”KS-47B” REPLACEMENT WlCK. SUBSTITUTE WICKS CAN SEVERELY REDUCE PERFORMANCE AND SAFETY.
  • Page 19 5. Place the wick adjuster on its side. Next, line up the three (3) openings in thewick adjuster: 1) the holes in the sleeve, 2) the...
  • Page 20 diagonal slots in the fixed part of the wick adjuster, and 3) the slots in the moving part of the wick adjuster controlled by the wick adjuster knob. 6. Fold the new wick in quarters and insert it into the wick adjuster from wickadjuster bottom. Place one of the pins in one of the lined-up openings.
  • Page 21 (paraffin) for about thirty (30) minutes. REPLACING THE IGNITER COIL USE ONLY GENUINE TOYOTOMI REPLACEMENT IGNITER COIL. SUBSTITUTE IGNITER COILS CAN SEVERELY REDUCE PERFORMANCE AND SAFETY. WARNING: To avoid contact burns, allow your heater to cool completely before replacing the igniter.

  • Page 22: Storage

    STORAGE At the end of each heating season, or when you do not plan to use your heater for an extended period of time, the following procedures are recommended. 1. CLEAN WlCK AND HEATER Follow directions in item 2 under ”INSPECTlON OF THE WlCK”. 2.

  • Page 23: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE SOLUTlON PAGE Wick fails to ignite Out of fuel Check fuel gauge; add fuel if necessary. Igniter coil does not glow Check wire connections. Replace batteries. Replace igniter coil, if necessary. 11, 14 Water in kerosene (paraffin)/ poor Drain tank.
  • Page 24 Wick adjuster knob is Dirty wick Clean wick as described under ”Care and hard to turn Maintenance”. Poor quality kerosene (paraffin) Drain tank and rinse with clean kerosene (paraffin). Install new wick and refill with fresh, clean kerosene (paraffin). Damaged mechanism Contact your dealer for service.

Table of Contents