10
en | Programming and Operating the AMAX System
5
Programming and Operating the AMAX System
The AMAX system can be programmed and operated with menus by using keypads and/or the
A-Link Plus remote programming software on a PC.
When all modules and devices are installed, the AMAX panel indicates the system status with
the LED status indicator on the system main board. A slow flashing in red (repeating on and
off with an interval of 1 second) indicates normal system operation.
The AMAX panel begins charging the battery. The green MAINS indicator on the keypad
indicates that the power supply is switched on and the keypad beeps.
4
The AMAX system provides two types of default access codes:
–
–
5.1
Option: Changing Menu Language
If necessary, the menu language can be changed. If not, proceed to section Accessing the
Menus, page 10.
1.
2.
3.
P
5.2
Accessing the Menus
Accessing the Programming Menu
1.
2.
3.
P
P
Accessing the User Menu
4
P
P
5.3
Menu Navigation
This section provides an overview of how to navigate the programming menu of a text keypad.
Selecting a Menu
1.
2.
3.
Exiting a Menu
4
2014.11 | 02 | F.01U.309.297
Press any key on the keypad.
The keypad stops beeping and you are prompted to enter a code.
Installer Code: [1234]
User Code: [2580]
Enter the installer code [1234] + [58] or the user code [2580] + [58] and press [#].
The available menu languages are displayed.
Select the desired language on the keypad.
Press [#].
The menu language is changed.
Confirm that the system is disarmed.
Enter the installer code. The default setting for the installer code is [1234].
The system displays [958] PROGR. MODE [-EXIT].
Enter [958] + press [#].
You have now access to the programming menu for configuring the AMAX system.
The STAY and AWAY indicators flash to indicate the programming mode.
Enter the user code. The default setting for the user code is [2580].
The system displays [▼/▲] USER MENU *STAY #AWAY [-] INFO.
You have now access to the user menu for operating the AMAX system.
Select the menu and operate according to the menu prompt.
Press [▼] or [▲] to navigate to the desired menu.
Press [#] to enter a menu.
Press [–] to get back to the previous menu.
Quick Start Manual
AMAX 2100 / 3000 / 4000
Bosch Sicherheitsysteme GmbH