Table of Contents
Advertisement
Connecting the Keyboard
Keyboards (all the supported models of MAXPRO NVR) can be connected to MAXPRO NVR
without any configuration.
You can also connect Honeywell's UltraKey keyboard that represents an industry-leading
approach to intelligent, user-friendly control of video management systems. Using the
UltraKey keyboard, you can perform actions such as selecting a panel, PTZ operations,
selecting a video source such as a camera, and others in the Viewer tab.
To connect a Keyboard to MAXPRO NVR
•
How to log on to the UltraKey Plus keyboard?
First time users of MAXPRO NVR must explicitly logon to UltraKey Plus keyboard in order to
use MAXPRO NVR.
To logon to the UltraKey Plus keyboard
1.
2.
3.
4.
5.
6.
How to log off from the UltraKey Plus keyboard?
To log off from an UltraKey Plus keyboard
1.
2.
3.
4.
5.
MAXPRO NVR Commissioning and Installation Guide
The UltraKey can be connected through the Ethernet. Set the UltraKey IP Address and
System Controller (IP Address of MAXPRO NVR) through the UltraKey configuration
settings. Refer to the
UltraKey manual
Power-on the UltraKey Plus keyboard.
Press the Menu key on the LCD.
Press the MAX-1000 Setup key on the LCD. The Left, Up, Right, and Down buttons
appear on the LCD.
Press the Ent hard key located on the right side of the UltraKey Plus keyboard.
Enter the default PIN password 1234.
Press Ent. The UltraKey Plus keyboard is now ready for use for performing the video
management functions.
Press the Menu key on the LCD.
Press the MAX-1000 Setup key on the LCD. The Left, Up, Right, and Down buttons
appear on the LCD.
Press the Down key.
Press the Ent hard key twice located on the right side of the UltraKey Plus keyboard. The
logoff confirmation message appears.
Press the Ent hard key.
S E T T I N G U P T H E M A X P R O N V R
Connecting the Keyboard
for more information.
29
Advertisement
Table of Contents
