Important Safeguards - Honeywell MAXPRO 2.5 Installation Manual

Important Safeguards

1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Lightning
11. Overloading
12. Objects and Liquids
13. Servicing
MAXPRO NVR Commissioning and Installation Guide
Read Instructions
All the safety and operating instructions should be read before the appliance is operated.
Retain Instructions
The safety and operating instructions should be retained for future reference.
Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol
cleaners. Use a damp soft cloth for cleaning.
Attachments
Never add any attachments and/or equipment without the approval of the manufacturer
as such additions may result in the risk of fire, electric shock, or other personal injury.
Water and/or Moisture
Do not use this equipment near water or in contact with water.
Ventilation
Place this equipment only in an upright position. Ensure product ventilation openings are
not obstructed.
Accessories
Do not place this equipment on an unstable cart, stand, or table.
The equipment may fall, causing serious injury to a child or adult,
and serious damage to the equipment. Wall or shelf mounting
should follow the manufacturer's instructions, and should use a
mounting kit approved by the manufacturer.
This equipment and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
equipment and cart combination to overturn.
Power Sources
This equipment should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power, please consult your equipment
dealer or local power company.
Power Cords
Operator or installer must remove power, BNC, alarm, and other connections before
moving the equipment.
For added protection for this equipment during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the equipment due
to lightning and power-line surges.
Do not overload wall outlets and extension cords to avoid the risk of fire or electric shock.
Never push objects of any kind through openings of this equipment as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the equipment.
Do not attempt to service this equipment yourself. Refer all servicing to qualified service
personnel.
A B O U T T H I S G U I D E
Important Safeguards
15