Changing The Default Ip Address And Machine Name - Honeywell MAXPRO 2.5 Installation Manual

4.
5.
6.
7.
8.
Changing the Default IP address and Machine
Name
MAXPRO NVR Commissioning and Installation Guide
Customizing MAXPRO NVR Single-box Turnkey Solutions (XE,SE,PE)
Click the Log On tab.
Type the new password in Password.
Type the new password again in Confirm Password.
Click OK.
Note:
Follow the similar procedure to change the password for the Trinity Smart VMD
Service, TrinityServer and TrinityController services.
Launch MAXPRO NVR, and verify if the system is running after changing the password.
Note:
See Changing the MAXPRO NVR IP Address and Machine Name
information.
A P P E N D I X
for more
73