Connecting A Video Source; Connecting Sensors; Connecting Control Relays - Honeywell FUSION STREAMER User Manual

3.3

CONNECTING A VIDEO SOURCE

There are different types of Video Sources that can be plugged into your Fusion Streamer unit including CCTV Cameras.
The back of the Fusion Streamer unit contains 4 video inputs which use the standard RG-53 BNC connector.
The Video inputs are RG-53 BNC connectors. Simply plug one end into your video source (DVD, Camera, etc.) and plug
the other end into the desired BNC input on the Fusion Streamer unit.
3.4

CONNECTING SENSORS

Each Fusion Streamer unit has 4 Sensor inputs. These inputs can be used with devices such as Infrared devices, glass
breakage alarms, door and window trips, and many more. The Sensors can be set to Normally Open or Normally Closed
inside the software.
Normally Open or Normally Closed option is available inside the Software.
3.5

CONNECTING CONTROL RELAYS

Each Fusion Streamer unit may have up to four Relay Outputs. The Control Relay Outputs can be connected to sirens,
3–2